KARA CNC H-Beam Drilling Machine

 CNC H-Beam Drilling Machine

1. Possibility of Drilling H-Beam and Original and Assembled Box Beams
2. Possibility of Three Spindles Simultaneous Performance for Asymmetric Drilling on H and Box Beam Wing and Flange
3. Possibility of Tools Replacement for Each Spindle Independent of Their Performance While Drilling
4. Work-Piece Clamping During Whole Drilling Process
5. Using Double Ball Screw for Spindles Fast Movement While Positioning Drill Bit
6. Ineffectiveness of Work-Piece Assembly Methods Such as Split H and Box Beam and Stud Welding on the Precision of Drill Bit Position
7. Easy and Exact Installation Due to Using an Integrated Chassis along with Rails
8. A Robust and Integrated Main Gate Structure for Sustainability and less Vibration during Drilling Process
9. A Centralized Electric Power System for Noise Reduction, Cabling and Trouble-shooting Improvement
10. Using an Air-Conditioning System than a fan in Power Center for Cooling
11. Using an Optic Sensor to Locate Zero Point on Work-Piece than a Mechanical Step or Micro Switch
12. Possibility of Connecting Controller to Internal Network-Cable-Wireless
13. Having a Monitoring System for each Spindle
14. Possibility of Drilling, Tape Cutting and Surface Milling on Spindles Simultaneously
15. Equipped with Three Separate Hand Wheels for Each Process and Discrete Selection of each Axis
16. A Robust Clamping System for Keeping the Work-Piece Constant While Drilling
17. CNC H-Beam Drilling Machine،Equipped with CAN-OPEN Network System than the Old Analog System

 

 CNC H-Beam Drilling Machine Control System

Promax (Italy)

NG WARP (Preliminary) Technical Specifications: 

• New Processor Cold Fire 410 Mips
• 16 axes +/-10 V- 32 axes STEP/DIR
• 64 axes Can Open or Ethercat
• RAM 64 Mb, FLASH 64 Mb, 32Kb battery
• SSD 64 Mb with Fat 16
• 1 x Ethernet 10/100 TCP/IP
• 1 X ETHERCAT CoE
• 1 RS232 - 1 RS232/485
• Max 128 Inputs PNP 24 Vdc Opto
• Max 112 Outs 1,2 A 24 Vdc Opto
• 8 Analog Inputs 12 Bit
• Plc cycle
• Linear Interpolation, Circular, Elicoidal
• TCP/IP Modbus
• Component Framework .NET
• Gear and Ecam
• VTB language

NGWarp is the new controller Promax HIGH end. Fully compatible with NG35 but with a processor about 3 times more powerful. NgWarp integrates ETHERCAT on a dedicated Ethernet channel. Equipped with operating system RTOS (Real Time Operating System) you can manage sessions INTERPOLATION IN MULTIPROCESS.CNC H-Beam Drilling Machine Axes:

• ANALOG +/- 10V max 16
• CAN OPEN max 64 and I/O
• ETHERCAT max 64 and I/O
• STEP/DIR. Max 32 freq Max 25 Mhz
• Through a second Ethernet port, you can manage the following protocols:
• MODBUS TCP/IP
• WEB SERVER
• RPC (remote procedure call)
• DEBUG

There are also two RS232 serial ports, one of which can be configured RS4845. Both ports operate the ODBUS RTU protocol.