KARA TCK 250,400,500S&600H

KARA TCK 250, 400, 500S & 600 H

KARA TCK 250, 400, 500S & 600 H are MIG/MAG welding rectifiers with constant voltage which are specifically designed and manufactured for MIG/MAG welding (Welding under the shield gas).
The welding voltage is adjusted step by step using two selectors (three selector switches in TCK 600).
An electronic circuit discontinuously controls the wire feeder speed using a volume.
The Control unit is provided with an operating mode selector switch (LATCK/UNLATCH 2Stroke/4Stroke), a timer volume switch for spot welding and a bum back circuit.
The control unit operates with 24 VAC voltages for the security of the operator.
The machine is equipped with two stationary solid rubber wheels and two rotatory solid rubber wheels.
The TCK 250 wire feeder has two rollers and the wire feeder of TCK 400, TCK 500 and TCK600 have 4 rollers.
The torch socket is EURO type. The rectifier is equipped with an Ammeter and a Voltmeter for displaying ampere and voltage values so as to readily set the welding parameters.
The hooks fitted on the machine intended for easy transportation by crane.
The rotatory flange built on top of the machines (TCK 400/TCK 500/600S/6ooH) for mounting wire feeder on the body of rectifier allows the rectifier to rotate 360°.
For using wire feeder in pending state (in continuous production line), one hook is fitted on the wire feeder.

 Welding Machine

• Gas Metal/Arc Welding (MIG/MAG)
• Flux Cored Arc Welding (FCAW)

Features

1. Three Phase Input Power
2. 16 Position Voltage Adjustment Selector
3. Potentiometer for Wire Speed Adjustment and Consequently Welding Voltage
4. Electronic Controlled Feeding System
5. Air Cool System
6. Shield Gas Shut Off Delay System
7. Welding Time Controller
8. Welding Up to Maximum 250 Amp.
9. Suitable for Steel, Stainless Steel, Aluminum, Copper
10. Digital Voltmeter and Ammeter
11. Separate Wire Feeder Unit
12. Two Wheels Drive with Smooth Wire Feed
13. Soft Start-Post Flow Gas- Latch/Unlatch
14. Easy Transportation

TCK 600S/600H/500S/400 and 250 Co2 Welding Machine

Application:

• Gas Metal/Arc Welding (MIG/MAG)
• Flux Cored Arc Welding (FCAW)

Features

1. Three Phase Input Power
2. 24/32 Position Voltage Adjustment Selector
3. Welding Time Controller
4. Air Cool/Water Cool System
5. Welding Up to 400/500/600 Amp
6. Suitable for Steel, Stainless Steel, Aluminum
7. Potentiometer for Wire Speed Adjustment and Consequently Welding Voltage
8. Electronic Controlled Feeding System
9. Welding Up to Maximum 250 Amp.
10. Separate Wire Feeder Unit
11. Precise Adjustment of Wire Speed, Voltage and Ampere
12. Digital Voltmeter and Ammeter
13. Easy Transportation
14. Four Wheels Drive (WIN) (ITALY) with Smooth Wire Feed
15. 220V Socket for Gas Heater Plugging
16. Suitable for Three Work Shifts from kara